Fldigi is a free program used for various digital modes. Thanks for visiting this page. It seems to have become the goto reference page for setting up fldigi for the Icom IC-7300, and I will try to keep it updated. This post describes the steps needed to get fldigi set up with the Icom IC-7300. For Icom transceivers: Use a CI-V cable for rig control in Fldigi (RigCAT) and then a CW interface for DTR keying. This configuration leaves your USB cable open for rig control in your logging program. “Unlink from REMOTE” must be used in the Icom menu. If you have any questions, please ask below.
Fldigi-DXLabs Gateway is a bridging application for use with the Digital Modes application
Fldigi by Dave Freese W1HKJ and the DXLabs suite by Dave Bernstein AA6YQ.
Commander – Frequency and Mode information is transferred to Fldigi automatically to act as Fldigi’s rig control.
DXView – Call signs entered into Fldigi’s call sign field will trigger a look up in DXView using the call signs information
SpotCollector – When Fldigi-DXLabs gateway is setup in SpotCollector to be the Digital Mode Application, Clicking on spots in SpotCollector will send the spot information to the gateway for setting the correct mode and frequency in Fldigi.
If you are a first time User then download the full install package and then the update file below it. If you already have the DXLabs Fldigi Gateway installed then you only need to download the update file and unzip it to the directory that DXLabs Fldig gateway is installed in.
Current Full Version: 1.6.63
Full Install Download:FldigiDXLabsGatewayFullInstallv1663.zip
Current Update Version: 1.7.0